BNPGG - T15, THREADWELL CUTTING TOOLS HIGH SPEED
- MSDS: BNPGG
- Manufacturer: BESLY PRODUCTS CORP
- Product Name: T15, THREADWELL CUTTING TOOLS HIGH SPEED
- National Stock Number: 9510-00N031597
Product Identification
Product ID:T15, THREADWELL CUTTING TOOLS HIGH SPEED
MSDS Date:11/01/1985
FSC:9510
NIIN:00N031597
MSDS Number: BNPGG
Responsible Party
SOUTH BELOIT, IL 61080
US
Emergency Phone: 815-389-2231
Info Phone: 815-389-2231
Cage: 92061
Contractor
Telephone: 815-389-2231
Cage: 92061
Ingredients
VIA INTRAPERITONEAL & INHAL ROUTES; PRLNGD EXPOS
RTECS: 9999999ZZ
IRRITANT TO
RTECS: 9999999ZZ
WHEN HANDLING, CUTTING (THERMAL OR MECHANICAL)
RTECS: 9999999ZZ
COBALT (SARA III)
CAS: 7440-48-4
RTECS: GF8750000
Fraction By Weight: 5.00%
OSHA PEL 0.1 MG/M3;AS CO
ACGIH TLV: 0.05 MG/M3;DUST 9293
CHROMIUM (SARA III)
CAS: 7440-47-3
RTECS: GB4200000
Fraction By Weight: 4.75%
OSHA PEL 1 MG/M3
ACGIH TLV: 0.5 MG/M3
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
IRON (III) OXIDE; (IRON)
CAS: 1309-37-1
RTECS: NO7400000
Fraction By Weight: BALANCE
OSHA PEL 10 MG/M3 (FE)
ACGIH TLV: 5 MG/M3(FE),B2; 9293
MANGANESE (SARA III)
CAS: 7439-96-5
RTECS: OO9275000
Fraction By Weight: 0.25%
OSHA PEL (C) 5 MG/M3 DUST
ACGIH TLV: 5 MG/M3 DUST 9293
MOLYBDENUM (PEL/TLV AS MO, INSOLUBLE COMPOUNDS)
CAS: 7439-98-7
RTECS: QA4680000
Fraction By Weight: 0.65%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3; 9293
VANADIUM PENTOXIDE; (VANADIUM) (SARA III)
CAS: 1314-62-1
RTECS: YW2460000
Fraction By Weight: 5.00%
OSHA PEL C,0.5 MG/M3
ACGIH TLV: 0.05 MG/M3RDUST;9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
CARBON BLACK; (CARBON)
CAS: 1333-86-4
RTECS: FF5800000
Fraction By Weight: 1.57%
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3
TUNGSTEN (PEL/TLV AS W, INSOLUBLE COMPOUNDS)
CAS: 7440-33-7
RTECS: YO7175000
Fraction By Weight: 12.50%
OSHA PEL 5 MG/M3;10 PPM STEL
ACGIH TLV: 5 MG/M3;10 PPM STEL
SILICON
CAS: 7440-21-3
RTECS: VW0400000
Fraction By Weight: 0.25%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:PROD IN FORM SOLD DOES NOT CONSTITUTE
PHYS HAZ/HLTH HAZ. SUBSEQUENT OPER SUCH AS ABRADING,
MELTING,WELDING, CUTTING/ PROCESSING IN ANY OTHER FASHION MAY PRDCE
POTNTLY HAZ DUST/FUME WHICH CAN BE INHALE D, SWALLOWED/COME IN CONT
W/SKIN/EYES. DETERM ACUTAL EXPOS BY INDUST HYGIENE MONITORING.
ACUTE:METALLIC (EFTS OF OVEREXP
Explanation of Carcinogenicity:CHROMIUM: GROUP 1 (NTP,IARC).
Effects of Overexposure:HLTH HAZ:TASTE; NAUS; TIGHTNESS OF CHEST;
FEVER; IRRIT OF EYES,NOSE,THROAT & SKIN; LOSS OF
CONSCIOUSNESS/DEATH DUE TO WELDING GASES/LACK OF O2. NO ADVERSE
EFTS FROM PRODS IN THEIR SOLID FORM. ADVERSE EFTS MAY/MAY NOT RSLT
FROM LONG-TERM EXPOS TO DUST/FUME/GASES/ETC. BY WAY OF SUBSEQUENT
OPER ON PROD. ING 7: (SUPDAT)
Medical Cond Aggravated by Exposure:AGGRAVATION OF PRE-EXISTING
RESPIRATORY OR ALLERGIC CONDITIONS MAY OCCUR IN SOME WORKERS.
First Aid
First Aid:INHAL: REMOVE TO FRESH AIR, IF CONDITION CONTINUES, CONSULT
PHYSICIAN. EYES: FLUSH WELL WITH RUNNING WATER FOR AT LEAST 15
MINUTES TO REMOVE PARTICULATE. GET MEDICAL ATTENTION. SKIN: BRUSH
OFF EXCESS DUST. WASH AREA WELL WITH SOAP AND WATER. INGESTION:
SEEK MEDICAL HELP IF LARGE QUANTITIES OF MATERIAL HAVE BEEN
INGESTED.
Fire Fighting
Flash Point:NONE
Extinguishing Media:USE MEDIA SUITABLE FOR SURROUNDING FIRE CONDITIONS
.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:NOT APPLICABLE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:USE GOOD HOUSEKEEPING PRACTICES TO
PREVENT ACCUMULATIONS OF DUST & TO KEEP AIRBORNE DUST
CONCENTRATIONS AT MINIMUM.
Other Precautions:MATL IS POTNTLY CONTAM W/COATINGS SUCH AS OILS FOR
PRESERVATIVES & OTHER CONTAM. IF MATL IS CONTAM, SPECIAL PREC (SUCH
AS PROCESS CNTRL & PERSONAL PROT EQUIP APPROP TO NATURE OF
SUSPECTED CONTAM SHOUL D BE TAKEN TO AVOID RSLTG EXPOS (ING 12)
Exposure Controls
Respiratory Protection:IF FUMES, MISTING OF DUST CONDITION OCCURS AND
TLV IS EXCEEDED, PROVIDE NIOSH/MSHA APPROVED RESPIRATORS.
Ventilation:GEN-RECOMMENDED (TO KEEP AIRBORNE CONCENTRATION OF DUST &
FUMES BELOW ACGIH TLV'S). LOCAL-AS REQUIRED.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:AS REQUIRED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EFTS OF OVEREXP: NUISANCE DUST. ING 1: CAN CAUSE CHRONIC INTERSTITIAL
PNEUM. WHEEZING MAY BE EVIDENCE OF HYPERSENSITIVITY TO COBALT. ING
2: HIGH PULM TOX & EXPERIMENTAL CAUSE OF NEOPLASM(S). ING 3: DU ST
CAN CAUSE CONJUNCT, CHOROIDITIS, RETINITIS & SIDEROSIS. OXIDE FUME
CAN CAUSE CHRONIC BRONCH. ING 4: HIGH TOX (ING 10)
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:5000F,2760C
Melt/Freeze Pt:M.P/F.P Text:2500F,1371C
Spec Gravity:7.8-8.2(H2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:VARIOUS SHAPES, SOLID, ODORLESS METAL.
Stability
Stability Indicator/Materials to Avoid:YES
REACTS WITH STRONG ACIDS TO GENERATE HYDROGEN GAS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:METALLIC OXIDES.
Disposal
Waste Disposal Methods:SOLIDS-SALE AS SCRAP FOR REUSE. DUST,
ETC.-FOLLOW FEDERAL, STATE AND LOCAL REGULATIONS REGARDING
DISPOSAL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.